The stall/Kato edition starter kit controls 24 stall or Kato motor channels right out of the box. Its new design features a no soldering approach with plug and play mimic panel assembly. All buttons and LEDs are connected with pre made leads that are simply pushed in place.

Starter kit highlights

  • Plug and play – no soldering when hooking up your mimic panel.
  • Starts at 24 control channels – easily expanded to 192.
  • Feedback enabled. Can display up to 192 feedback channels when expanded.
  • Each indicator channel drives a pair of LEDs for ON/ON route indication.
  • Includes four Stall/Kato Controllers for 24 channel motor control right out of the box.
  • Includes 24 pairs of panel mount LEDs *** New!
  • Includes 24 panel mount buttons and cable assemblies *** New!
  • Includes quick start guide and video.
  • Easy linking to other mimic panels for cooperative control.
  • Can also run Solenoid Controllers alongside Servo Controllers in a mixed setup.
  • Easily integrates to our hardware Route Processor.

With this kit you can hook up your stall/Kato controllers to points. Layout wiring is massively reduced as there’s only one cable connecting the MultiPanel to all Servo Controllers.

Each LED channel drives a pair of LEDS, so for turnout indication its easy to see which way the route is set.

The MultiPanel contained within this starter kit also has feedback display. This means you can set up block detection and turnout position indication on your layout for up to 192 feedback channels. This information is sent back up the network cable and displayed via your MultiPanel feedback port.

The kit starts at 24 channel control and is easily and inexpensively expanded up to 192 switch channels.

The kit includes:

1 x MultiPanel Processor (plug-n-play)

2 x LED GREEN/GREEN plug n play cable pack for 24 turnouts or signals

2 x Button plug n play cable pack (black buttons) for 24 turnouts or signals

4 x Stall/Kato Controllers (24 points)

4 x Stall/Kato Controller hook up cables

1 x MultiPanel LED cable (with 2 x LEDs)

1 x MultiPanel button cable

1 x MultiPanel panel mount button

2 x Network cables (50cm)

4 x Pullup jumpers (fitted)


Starter Kit Stall/Kato Quick Start Guide (plug-n-play)

MultiPanel User Guide V2

Stall / Kato driver user guide


Starter Kit quick start guide – Solenoid edition

MultiPanel V 2.1 new features

Starter kit expansion


Weight 500 g
Dimensions 20 × 18 × 6 cm

You may also like…