Connect the servos
Socket S1 on each driver. Check plug orientation.
S1 → servoYOUR FIRST SUCCESS
One button. The right point.
Begin with a connected, ready-to-use starter kit.
01 / 07
Connect the switches
Inputs 1 and 9 on the Panel Controller.
IN 1 · IN 9Connect the lights
Indicator pairs on outputs 1 and 9.
OUT 1 · OUT 9Power off before wiring. Follow the connector and polarity diagrams in the board manuals.
Wi-Fi
ILLUSTRATION ONLYGive your boards the details they need to join your home network.
Network nameThe Sidings
Example password••••••••••••
Example details only — no network connection is made.
The actual program may look different as it is updated. Use the playback controls to repeat a step.Servo Driver
Small servos for points, signals and moving features.
In the starter kitSolenoid Driver
Compatible twin-coil point motors, including suitable Peco and SEEP types.
A brief pulseStall / Kato Driver
Compatible slow-motion and Kato motors. Select the correct mode.
Motor-specific setupSame command-number principle and CAN data pair. Power, wiring and operating modes are specific to each driver.
Power each board
Regulated supply of the correct rating.
Join the data pair
CAN H to H · CAN L to L.
Two end jumpers
Keep the first and last. Remove the middle ones.
Match the numbers
Switch → servo. Driver reply → panel light.
Start with one working point. Add the next when you are happy with the first.
Simplified teaching view · not a complete installation guide
A complete guided introduction
Three pauses to try things yourself.
Sound starts when you press play.
The narration is paused. Try a switch, then continue when you are ready.
Try either switch. Only the matching servo will respond.
Connect the boards, match a number, then try the switches yourself.
0:00 / 1:20
A safe place to experiment
These are practice controls, not real board settings. The large diagram shows socket S1 on each driver; the tables also show what every other output does.
Choose a switch or open the settings below.
Edit numbers & EasyConfig groups
Whole numbers 1–60,000. Edits apply to this demonstration immediately. EasyConfig replaces the selected board’s group. Reset restores all three boards.
All changes stay in this session. Reloading resets the practice area. No real Wi-Fi, password or equipment connection is used.